HMI Touch Calibration Instructions

• Related Articles

• DME Electrical Installation Manual

  Please see attached PDF. Includes guide for setting up common electrical components such as PLC/HMI, motors, VFDs, instrumentation. Also includes FAQ at the end.

• Mixing Station Angle Seat Valves Troubleshooting

  Issue: Mixing Valve won't open/close properly Common Troubleshooting Tips: 1. Check Wiring Refer to Electrical Schematic Check for loose wires, incorrect terminal locations, blown fuse, faulty PLC output Check 24VDC, continuity using a multimeter 2. ...

• Settings for Remote Access

  The attached document outlines the setup for enabling Remote Access to the BH Touchscreen through built-in EWON VPN software. This will allow the operator to use a web browser from a computer or phone to monitor and control their Touchscreen. A DME ...

• VFD Modbus Communication Troubleshooting

  Please see attached PDF. Used when customer's loses speed control of their VFDs on a standard PLC system.